Skip to content

Concrete Calculator

Calculate how much concrete you need for a slab, footing, round column or steps in cubic yards, cubic metres and pre-mix bags.

  • Free, no sign-up
  • Runs in your browser
  • Reviewed Nov 6, 2026

How to use the Concrete Calculator

  1. Choose what you're pouring and your measurement unit.
  2. Enter the dimensions (thickness for slabs, diameter and depth for posts).
  3. Set how many identical pours and a waste allowance (5–10% is common).
  4. Read the volume to order and the number of pre-mix bags.

How it works

Slab/footing volume = length × width × depth. Round column = π × (diameter ÷ 2)² × height. Steps are treated as solid: each step k is run × (k × rise) × width, summed over all steps. Volume × (1 + waste) gives the amount to order. Bags = order volume ÷ bag yield, rounded up (80 lb ≈ 0.60 ft³, 60 lb ≈ 0.45 ft³, 40 lb ≈ 0.30 ft³).

Worked examples

10×10 ft patio, 4 in thick

10 × 10 × 0.333 ft = 33.3 ft³ = 1.23 yd³. With 10% waste that's 1.36 yd³ — about 62 × 80 lb bags, so ready-mix delivery is likely cheaper.

Limitations and assumptions

  • Bag yields vary by brand and mix; check the bag.
  • Doesn't design reinforcement, base preparation or structural requirements — follow local codes for structural work.

Frequently asked questions

How thick should a patio slab be?

4 inches (10 cm) is common for patios and walkways; driveways are often 5–6 inches. Local codes and soil conditions decide.

G

Built and reviewed by Guru G

Calculation logic is covered by automated tests against known values. Last reviewed Nov 6, 2026. Found a problem? Let us know — see our editorial policy.